Blog
Most Popular
-
PTFE Uses, Advantages and Limitations
Updated 29/01/2026 Polytetrafluoroethylene, PTFE, or Teflon® as it is often referred to, is a tough, ductile material with excellent thermal properties and outstanding resistance to chemicals and the passage of electric current. PTFE has an exceptionally low coefficient of friction, believed to be lower than any other solid.
Read More -
What is Polytetrafluoroethylene? (PTFE)
Updated 10/02/2026 PTFE/Teflon: Properties, Structure, and Performance Explained Polytetrafluoroethylene (PTFE) is a tough, flexible, non-resilient thermoplastic best known for its exceptional chemical resistance, outstanding thermal stability, and extremely low coefficient of friction.…
Read More -
What is Sol-Gel coating?
Updated 05/02/2026 Sol-Gel coatings, often referred to as ceramic coatings, are advanced inorganic coating systems formed from small inorganic particles suspended in a liquid solution.
Read More -
PTFE vs PEEK: Choosing the Right High-Performance Plastic for Critical Industries
Updated 12/02/2026 Two of the most frequently specified materials are PTFE and PEEK. Understanding their differences is critical when specifying components such as seals, valve seats, bearings, insulators or structural parts.
Read More -
PTFE vs PFA: Understanding the Differences Between Key Fluoropolymers
Updated 12/02/2026 Fluoropolymers share several unique properties which make them suitable for use in the automotive, aerospace, oil and gas and medical industries. PTFE, PFA and FEP are the most well-known and common fluoroplastics. So what, exactly, are their differences?
Read More -
Polyamide vs Polyimide: Key Differences in Performance and Applications
Updated 10/02/2026 Polyamides and polyimides are two types of compounds that often get confused due to their similar names. However, they are very different from each other in chemical properties as well as mechanical properties.
Read More -
PTFE vs PCTFE: Understanding the Differences in Structure, Properties, and Performance
Updated 10/02/2026 The fundamental difference between PTFE and PCTFE lies in their chemical structure. In PCTFE, one fluorine atom in the polymer backbone is replaced with a chlorine atom. This seemingly small change results in significant differences in mechanical strength, thermal performance, processability, and end-use applications.
Read More -
What is Polyvinylidene Fluoride? (PVDF)
Updated 12/02/2026 Polyvinylidene Fluoride (PVDF) is a tough, chemically resistant fluoropolymer known for its balance of mechanical strength, purity and cost efficiency. First identified in 1969 by Dr.
Read More -
What is HPHT? (High Pressure, High Temperature)
What is HPHT? (High Pressure, High Temperature) HPHT or High Pressure, High Temperature is defined as those Wells with a bottom hole temperature greater than 150°C (300°F) and requiring pressure control…
Read More
More Articles
Engineering Collaboration for High-Load PTFE Bearing Applications
A leading EPC contractor in the offshore sector required a PTFE bearing solution for a recessed sliding application within a large infrastructure project. The application was non-standard, incorporating a recessed design and tight installation constraints.
Offshore Bridge Bearings - What They Do and Why They Matter
Bridges, link-spans, walkways and access bridges used offshore (e.g. between oil & gas platforms, between a platform and a gangway, or between marine structures) face uniquely harsh conditions: salt spray, temperature swings, dynamic loads from wave motion and wind, and sometimes corrosive marine atmosphere. That's where offshore bridge bearings come into play.
What is a Slide Bearing?
In the world of structural engineering, one of the most common challenges is dealing with the movement of structures. To counteract these forces and ensure the longevity and stability of structures, engineers incorporate slide bearings into their designs.