Blog
Most Popular
-
PTFE Uses, Advantages and Limitations
Updated 29/01/2026 Polytetrafluoroethylene, PTFE, or Teflon® as it is often referred to, is a tough, ductile material with excellent thermal properties and outstanding resistance to chemicals and the passage of electric current. PTFE has an exceptionally low coefficient of friction, believed to be lower than any other solid.
Read More -
What is Polytetrafluoroethylene? (PTFE)
Updated 10/02/2026 PTFE/Teflon: Properties, Structure, and Performance Explained Polytetrafluoroethylene (PTFE) is a tough, flexible, non-resilient thermoplastic best known for its exceptional chemical resistance, outstanding thermal stability, and extremely low coefficient of friction.…
Read More -
What is Sol-Gel coating?
Updated 05/02/2026 Sol-Gel coatings, often referred to as ceramic coatings, are advanced inorganic coating systems formed from small inorganic particles suspended in a liquid solution.
Read More -
PTFE vs PEEK: Choosing the Right High-Performance Plastic for Critical Industries
Updated 12/02/2026 Two of the most frequently specified materials are PTFE and PEEK. Understanding their differences is critical when specifying components such as seals, valve seats, bearings, insulators or structural parts.
Read More -
PTFE vs PFA: Understanding the Differences Between Key Fluoropolymers
Updated 12/02/2026 Fluoropolymers share several unique properties which make them suitable for use in the automotive, aerospace, oil and gas and medical industries. PTFE, PFA and FEP are the most well-known and common fluoroplastics. So what, exactly, are their differences?
Read More -
Polyamide vs Polyimide: Key Differences in Performance and Applications
Updated 10/02/2026 Polyamides and polyimides are two types of compounds that often get confused due to their similar names. However, they are very different from each other in chemical properties as well as mechanical properties.
Read More -
PTFE vs PCTFE: Understanding the Differences in Structure, Properties, and Performance
Updated 10/02/2026 The fundamental difference between PTFE and PCTFE lies in their chemical structure. In PCTFE, one fluorine atom in the polymer backbone is replaced with a chlorine atom. This seemingly small change results in significant differences in mechanical strength, thermal performance, processability, and end-use applications.
Read More -
What is Polyvinylidene Fluoride? (PVDF)
Updated 12/02/2026 Polyvinylidene Fluoride (PVDF) is a tough, chemically resistant fluoropolymer known for its balance of mechanical strength, purity and cost efficiency. First identified in 1969 by Dr.
Read More -
What is HPHT? (High Pressure, High Temperature)
What is HPHT? (High Pressure, High Temperature) HPHT or High Pressure, High Temperature is defined as those Wells with a bottom hole temperature greater than 150°C (300°F) and requiring pressure control…
Read More
More Articles
When Should You Use Filled PTFE Instead of Virgin PTFE?
PTFE is well known for its exceptionally low friction, excellent chemical resistance and wide operating temperature range but when a component needs greater wear resistance, load-bearing capability, dimensional stability or resistance to deformation, a filled PTFE grade may provide a better solution.
Why Does PTFE Creep and How Can You Prevent It?
PTFE is known for its excellent chemical resistance, low friction and wide operating temperature range. But it also has a limitation that engineers need to consider carefully: PTFE can creep under sustained load.
PTFE Alternatives
PTFE has long been one of the most widely used high-performance polymers in engineering. Its combination of low friction, excellent chemical resistance, non-stick properties and broad operating temperature range makes it difficult to replace. But there are situations where PTFE may no longer be the best choice; we explore why and what can be a suitable alternative.