Blog
Most Popular
-
What is Sol-Gel coating?
What is Sol-Gel coating? Sol-Gel, (otherwise known as Ceramic) materials are formed from small inorganic particles suspended in solution that gel together to form an inorganic matrix.
Read More -
Polyamide vs Polyimide
Polyamides and polyimides are two types of compounds that often get confused due to their similar names. However, they are very different from each other in chemical properties as well as mechanical properties.
Read More -
PTFE vs PCTFE
The difference between PTFE and PCTFE is mainly in the chemical structure. The addition of one Chlorine atom in place of one Fluorine atom leads to a massive change in its properties and application.
Read More -
PTFE Uses, Advantages and Limitations
Polytetrafluoroethylene, PTFE, or Teflon® as it is often referred to, is a tough, ductile material with excellent thermal properties and outstanding resistance to chemicals and the passage of electric current. PTFE has an exceptionally low coefficient of friction, believed to be lower than any other solid.
Read More -
What is HPHT? (High Pressure, High Temperature)
What is HPHT? (High Pressure, High Temperature)HPHT or High Pressure, High Temperature is defined as those Wells with a bottom hole temperature greater than 150°C (300°F) and requiring pressure control…
Read More -
What is Polyvinylidene Fluoride? (PVDF)
PVDF is a tough, stable fluoropolymer with distinct engineering advantages. Discovered in 1969 by Dr Heijji Kawai, PVDF has a good performance to cost ratio.
Read More -
What is Fluorinatedethylenepropylene? (FEP)
Fluorinatedethylenepropylene (FEP) is a copolymer of hexafluoropropylene and tetrafluoroetheylene that shares PTFE’s chemical resistance and useful low friction properties, but is more easily formable.
Read More -
PTFE vs PEEK
High-Performance Plastic are distinguished primarily by their temperature stability, but also their mechanical properties.
Read More -
PTFE vs PFA
Fluoropolymers share several unique properties which make them suitable for use in the automotive, aerospace, oil and gas and medical industries. PTFE, PFA and FEP are the most well-known and common fluoroplastics. So what, exactly, are their differences?
Read More
More Articles
Why is surface preparation important before coating?
In the words of Benjamin Franklin, “Failing to prepare is preparing to fail” Surface preparation is one of the most important factors for a successful coating system because the performance of…
An introduction to low friction coating
Low friction coatings provide dry film lubrication where liquid lubricants could fail or are simply impractical.
What is Halar coating?
What is Halar® Coating?Halar® is the brand name for ECTFE or Ethylene-chlorotrifluoroethylene, a partially fluorinated semi-crystalline polymer developed for chemical resistance and introduced in 1970.